Instructions for use
First, premix agrochemicals with RIZO OIL. Once a homogeneous mixture has been achieved, add it to the spraying tank when the agitator is on.
In case of using formulated products such as wettable products or dispersible granules, the pesticide must be dissolved with a sufficient volume of water so that a paste is formed; then, add the recommended dose of RIZO OIL. Once the premix has been homogenized, add it to the spraying tank.
If due to operative matters, the realization of the premix must be carried out in the same spraying tank, care should be taken that the same does not contains water.
It is not recommended to premix 2 or more products together. In case that it was necessary to apply more than 1 product, premix separately.
There is an exception where making the premix of Oils in general with microencapsulate insecticides cannot be done since a dose above 20% of oil dissolves microcapsules.
Important: Losses caused by the evaporation of products, predetermines the good result of an agricultural application. When higher the temperature and lower the relative humidity, bigger will be the evaporation losses.